بازرگانان رسانه های فضای باز که ماشین های تبلیغاتی در فضای باز می خرند باید درک درستی از ماشین های تبلیغاتی عمودی در فضای باز داشته باشند. برای یک محصول ماشین تبلیغاتی عمودی با کیفیت-، فرآیند تولید باید مطابق با استانداردهای بین المللی باشد. چه ساختار کلی باشد و چه سطح جزئیات، باید استاندارد شناسایی بین المللی ISO9001 را داشته باشد. دستگاه تبلیغاتی عمودی Xunbao، روند مونتاژ کل دستگاه به شرح زیر است.
1. Chassis assembly process
1. The outdoor advertising machine must be the chassis first, because it is placed outdoors, so IP65 is a general international standard. Generally, check whether the glass glue on the inside of the welded shell of the shell is uniform, and whether it is dewed when placed in the outdoor welding shell.
2. Check the mounting bracket and whether the nut is tightly adhered to the frame body, and can be placed in a fixed manner compared to the mounting hole.
3. Compare the chassis of the outdoor advertising machine, fix the nuts, and carefully check the screw holes and the gaps where the glass glue is applied. If there is any separation from the glue or water, please disassemble the holes as soon as possible and tighten the waterproof glue.
4. Watch the surface of the whole machine clean and check whether there is dust inside the glass. Feel the inside of the glass to see if it squeezes flat. Smooth it out with gravity to see if there are blisters or air bubbles. If there are, the touch is definitely not qualified.
5. Open the door frame of the outdoor advertising machine and try to close the door panel with one hand. If the door panel touches the pressure strip, the door panel cannot be closed with force, indicating that the door frame design of the outdoor advertising machine does not meet the anti-theft standard. One is that the door panel structure is not good, and the other is that there is a problem with the lock assembly.
6. Check the operating noise of the machine on the chassis body, and see whether the insulation cotton on the body can insulate heat. If the air conditioner is noisy, the insulation cotton does not reflect at all. First of all, the heat dissipation structure of the air conditioner should be considered.
2. Inspection standards for outdoor LCD advertising machine screens
1. According to ordinary wipe, use a dust-free cloth to coat around the glass to see if there are water droplets around the glass. If you find glass or water droplets in the screw holes, please fill it with glass glue.
2. Use a caliper to measure the distance between the inside of the glass and the LCD screen. If the adhesive strip exceeds 1mm, please pay attention to the design of the air-cooled structure.
3. Check the internal boards of the LCD screen, whether the lines are clear, and whether the surface of the LCD screen is guaranteed to be free of dust and stains.
4. Carefully watch the LCD screen bezel and support frame, and check whether the LCD screen is placed reasonably according to the direction indicated on the backlight.
5. Check the fan, insulation cotton, and protective net to see if the manufacturer is the real manufacturer.
6. Check the drive components such as drive board, decoder board, terminal block, power supply, etc., and analyze according to the standard of "Electronic Configuration Table".
3. Customized vertical advertising machine software positioning.
Vertical advertising machine, if it is a custom-designed product, it is also necessary to perform software debugging on the vertical advertising machine. For example; electronic newspaper reading software, highway toll display, or network remote, these are customized versions of vertical advertising machines. It is different from the outdoor advertising machine with VGI and HIMD interfaces reserved for ordinary boards, so the requirements for WIFI and 3G antennas will be very high. General ordinary vertical advertising machine, as long as it meets these 12 points. The outdoor advertising machine produced is already very good.
